We agree with iFixIt - you have the right to repair. Below are a few ways we can help you maintain a functional device, forever.
EPD (screen)
We'll sell you one for $50 (including shipping), or you can get this one. Email orders@usetrmnl.com and see our disassembly + assembly guides.
Case enclosure
Have access to a 3D printer? Check out the open source designs here.
Alternatively we'll send you a native case for $10 + shipping. Email orders@usetrmnl.com and see our disassembly + assembly guides.
Battery
Unfortunately we can't send "loose" batteries, but this one (1000mAh) will fit. Alternatively this option provides 3x the power (3000mAh), but does not fit in the native TRMNL enclosure. If you prefer a longer battery life, consider pairing the larger battery with one of our many 3D printable case designs. Watch this assembly video for installation steps.
PCB (main board)
We'll send you one for $10. Email orders@usetrmnl.com and watch this assembly video for installation steps. We will also flash the latest firmware on your behalf, or you can do so in 1 click here.
Other accessories
USB-C
Any cable should work, but we can sell you one for $5:
https://shop.usetrmnl.com/products/charging-cable
Kickstand
We'll send you a new one for free, plus a little help for postage. Email orders@ustrmnl.com and follow these steps to replace it.
Microfiber cloth / Anti-glare film
We'll send you a new one for free, plus a little help for postage. Email orders@ustrmnl.com.
PCB Screws
Our OG model uses M3-0.5 x 4mm screws to attach the PCB to the back enclosure. Get more with the same specs here.